Name Type Writable Units Description
floatyFeetStep increment for radio altimeter decision height
floatyFeetThe decision height for the radio altimeter
inty10HzThe current frequency of the nav1 radio.
inty10HzThe current frequency of the nav2 radio.
inty10HzThe current frequency of the copm1 radio.
inty10HzThe current frequency of the com2 radio.
inty10HzThe standby frequency for the radio mentioned above for flip/flop radios.
inty10HzThe standby frequency for the radio mentioned above for flip/flop radios.
inty10HzThe standby frequency for the radio mentioned above for flip/flop radios.
inty10HzThe standby frequency for the radio mentioned above for flip/flop radios.
inty10HzThe standby frequency for the radio mentioned above for flip/flop radios.
inty10HzThe standby frequency for the radio mentioned above for flip/flop radios.
inty10HzThe standby frequency for the radio mentioned above for flip/flop radios.

NOTE: X-Plane does not currently feature a flip-flop standalone DME instrument, but the data exists.

floatydegtThe 'obs' heading programmed into VOR and HSI gauges that follow nav radio 1. (true: legacy)
floatydegtThe 'obs' heading programmed into VOR and HSI gauges that follow nav radio 2. (true: legacy)
floatydegmThe 'obs' heading programmed into VOR and HSI gauges that follow nav radio 1. (mag: modern) pilot
floatydegmThe 'obs' heading programmed into VOR and HSI gauges that follow nav radio 1. (mag: modern) copilot
floatydegmThe 'obs' heading programmed into VOR and HSI gauges that follow nav radio 2. (mag: modern) pilot
floatydegmThe 'obs' heading programmed into VOR and HSI gauges that follow nav radio 2. (mag: modern) copilot
inty???Which nav radio is the slaved DME connected to
inty???Settings for the com radio audio panel. 6=com1,7=com2
intyfailure_enumNav and com 1 radio
intyfailure_enumNav and com 2 radio
intyfailure_enumNav-1 radio
intyfailure_enumNav-2 radio
intyfailure_enumCom-1 radio
intyfailure_enumCom-2 radio
intyfailure_enumnav radio 1 - removed from 10.00 - 10.36, compatibility only in 10.40 - DO NOT USE - use rel_nav1
intyfailure_enumnav radio 2 - removed from 10.00 - 10.36, compatibility only in 10.40 - DO NOT USE - use rel_nav2
intyfailure_enumcom radio 1 - removed from 10.00 - 10.36, compatibility only in 10.40 - DO NOT USE - use rel_com1
intyfailure_enumcom radio 2 - removed from 10.00 - 10.36, compatibility only in 10.40 - DO NOT USE - use rel_com2
intybooleanOverride navcom radios
intybooleanOverride ADF radios
floaty0-1Volume level for the com radios, ratio from 0 (silent) to 1 (max loudness)
floatyfeetRadio altitude bug entered into the radio altimeter. Pilot side.
floatyfeetRadio altitude bug entered into the radio altimeter. Copilot side.
intybooleanNav radio 1 off or on, 0 or 1.
intybooleanNav radio 2 off or on, 0 or 1.
int[12]ybooleanNav radio N off or on, 0 or 1. Was 0-10 pre-11.10. Radios 11 and 12 are WAAS/EGNOS receivers
intybooleanCom radio 1 off or on, 0 or 1.
intybooleanCom radio 2 off or on, 0 or 1.
intyenumADF radio 1 off or on, 0 = off, 1 = antenna, 2 = on, 3 = tone, 4 = test
intyenumADF radio 2 off or on, 0 = off, 1 = antenna, 2 = on, 3 = tone, 4 = test
intybooleanDME radio 1 off or on, 0 or 1.
inty10hertzNav radio 1 frequency, hz
intyMhzNav radio 1 frequency, Mhz component only
intykhzNav radio 1 frequency, khz component only
inty10hertzNav radio 2 frequency, hz
intyMhzNav radio 2 frequency, Mhz component only
intykhzNav radio 2 frequency, khz component only
int[12]y10hertzNav radio N frequency, hz
int[12]yMhzNav radio N frequency, Mhz component only
int[12]ykhzNav radio N frequency, khz component only
inty10hertzCom radio 1 frequency, 10 hz
intyMhzCom radio 1 frequency, Mhz component only
intykhzCom radio 1 frequency, khz component only
intyhertzCom radio 1 frequency, hz, supports 8.3 khz spacing
inty10hertzCom radio 2 frequency, 10 hz
intyMhzCom radio 2 frequency, Mhz component only
intykhzCom radio 2 frequency, khz component only
intyhertzCom radio 2 frequency, hz, supports 8.3 khz spacing
inty10hertzADF radio 1 frequency, hz
inty10hertzADF radio 2 frequency, hz
inty10hertzDME radio frequency, hz
inty10hertzNav radio 1 standby frequency, hz
intyMhzStandby Nav radio 1 frequency, Mhz component only
intykhzStandby Nav radio 1 frequency, khz component only
inty10hertzNav radio 2 standby frequency, hz
intyMhzStandby Nav radio 2 frequency, Mhz component only
intykhzStandby Nav radio 2 frequency, khz component only
int[12]y10hertzNav radio N standby frequency, hz
int[12]yMhzStandby Nav radio N frequency, Mhz component only
int[12]ykhzStandby Nav radio N frequency, khz component only
inty10hertzCom radio 1 standby frequency, 10 hz
intyMhzStandby Com radio 1 frequency, Mhz component only
intykhzStandby Com radio 1 frequency, khz component only
intyhertzCom radio 1 standby frequency, hz, supports 8.3 khz spacing
inty10hertzCom radio 2 standby frequency, 10 hz
intyMhzStandby Com radio 2 frequency, Mhz component only
intykhzStandby com radio 2 frequency, khz component only
intyhertzCom radio 2 standby frequency, hz, supports 8.3 khz spacing
inty10hertzADF radio 1 standby frequency, hz
inty10hertzADF radio 2 standby frequency, hz
inty10hertzDME radio standby frequency, hz
intyenumDME display selection of what NAV radio to display. 0 for Nav1, 1for Nav2.
intyenumFrequency-to-change selection for the all-in-one radio, 0->5 are Nav1, Nav2, Com1, Com2, ADF1, ADF2.
inty10hertzLeft Nav radio 1 frequency, hz
inty10hertzLeft Nav radio 2 frequency, hz
inty10hertzLeft Com radio 1 frequency, 10 hz
intyhertzLeft Nav radio 1 frequency, hz, supports 8.3 khz spacing
inty10hertzLeft Com radio 2 frequency, 10 hz
intyhertzLeft Nav radio 2 frequency, hz, supports 8.3 khz spacing
inty10hertzLeft ADF radio 1 frequency, hz
inty10hertzLeft ADF radio 2 frequency, hz
inty10hertzLeft DME radio frequency, hz
inty10hertzRight Nav radio 1 frequency, hz
inty10hertzRight Nav radio 2 frequency, hz
inty10hertzRight Com radio 1 frequency, hz
inty10hertzRight Com radio 2 frequency, hz
inty10hertzRight ADF radio 1 frequency, hz
inty10hertzRight ADF radio 2 frequency, hz
inty10hertzRight DME radio frequency, hz
intyboolean1 if right nav 1 radio is selected, 0 if left is selected
intyboolean1 if right nav 2 radio is selected, 0 if left is selected
intyboolean1 if right com 1 radio is selected, 0 if left is selected
intyboolean1 if right com 2 radio is selected, 0 if left is selected
intyboolean1 if right adf 1 radio is selected, 0 if left is selected
intyboolean1 if right adf 2 radio is selected, 0 if left is selected
intyboolean1 if right DME radio is selected, 0 if left is selected